5 days agoAuthor: Shashank Shukla
- Copy link
Scorching In the hot summer, the cooler gives great relief to all of us. However, as the summer passes, we pick it up and throw it into a corner. This negligence done with the cooler can be overshadowed for us in the next summer. Parts can deteriorate if not maintained properly.
In such a situation, if you want your cooler to give sufficient coolness in the next summer, then some things need to be taken care of for its maintenance.
Today we ‘Make life easier’ We will talk about this in the column and know that-
- How to maintain coolers after summer?
- What mistakes should be avoided while storing the cooler?
Question- What can cause harm by not maintaining cooler in a manner?
answer- The cooler needs better care and maintenance than other electronic devices. The cooler has two motors. It can have leakage due to water pumps.
If timely cleaning or repair is not done, it can cause short-circuit, which can pose a risk of fire or current. Also other problems can be produced. Let us understand it through graphic.
Question- Why is it necessary to maintain cooler in a manner?
answer- Whatever the goods, maintenance is very important. This makes the goods last longer and works better. The correct maintenance of the cooler in this way increases his age.
At the same time, there is cold, there are no problems like leakage or smell and there is no risk of current. Let us understand it through graphic.
Let us understand graphics in detail.
For better performance
If the cooler is periodically cleaned and carried out, it works better during the summer days. Due to lack of dust and soil, air speed is better and the room cools quickly.
Electric consumption is low
Due to dust and dirt, the cooler has to work more hard and due to this, electricity consumption is more. Whereas in clean coolers, fans and motors run easily and do not load on the motor, which also reduces electricity bills.
Sudden repair is protected
If there is no maintenance on time, the cooler can suddenly stop or start making a sound. Cleaning and examining periodically can avoid such troubles.
Clean and fresh air is found
Dirty coolers can cause smelly and diseases, but if the cooling pads, water tanks and fans are cleaned, the room remains fresh.
The room cools quickly
All the coolers of the cooler work properly with the correct maintenance. The fan gives strong wind, the motor does not heat up and the circulation of water also remains correct. This cools the room quickly.
Essential for safety
If the wiring is loose or water is leaking, the risk of current increases. Such accidents can be avoided by repairing on time.
Avoid last time troubles
If the heat starts suddenly and the cooler is found, then there is a problem. In such a situation, if maintenance has been done in advance, then there is no tension in such a time.
There is no problem due to sudden change in weather
If the cooler is stored in good condition, it can be run immediately without any repair when the heat returns.
Spending is low
Often bad coolers have to be cured repeatedly, which costs more money. In such a situation, if care is already taken care of, there is no need to call a mechanic and no money is spent.
Question- How to maintain coolers after summer?
answer- We must pay attention to some things while keeping the cooler after summer. Let us understand it through graphic.
Let us consider these points as step-by-step.
Step 1: Cleaning Water Tank
Remove the water stored inside the cooler and clean the water tank thoroughly with a brush or old cloth.
If you feel fungus, mud or smell inside, clean it with light detergent or vinegar solution.
Finally, dry the tank well so that there is no moisture left in it.
Step 2: Cooling pad drying
Remove the cooling pad and dry it completely in the sun.
Clean the dust frozen on them with a brush so that the air does not smell at the time of use next time.
Only if it dries completely, apply them in the cooler again.
Step 3: Pipe and Pump checking
Remove the cooler water pipe and pump and dry in the sun.
If there is a crack or broken in pipes and pumps, then get it fixed.
Out the motor before keeping it.
Step 4: Blade and motor cleaning
Clean the cooler fan slowly with a cloth or brush.
Keep in mind that water does not get water in the motor at all. This can cause short-circuit risk and may cause the motor to deteriorate.
Step 5: Security from Rust
Apply a thin coating of anti-rest spray on the metal parts of the cooler.
This will reduce the effect of moisture and after opening the cooler in the next season, its metal parts will be protected from the war.
Step 6: Wiring Protection
Protect the cooler wiring thoroughly and secure them with the help of tape.
Change the chopped wire before using the cooler.
Step 7: Cover and keep
If the cooler cleaning is completed, cover it with a clean and light cover.
Plastic cover or cotton cloth can be used.
Step 8: Place a safe place
Keep the cooler in a place where there is no effect of damping, sunlight or rain.
Keep a store room, dry corner of the balcony or a place where the wind and water are safe from water.
,
Also read this news related to utility
Make life easier- Monsoon deteriorating grocery in early monsoon: from bread to lentils, all will be fresh, adopt these 9 easy solutions
The monsoon season is going to knock soon. If the cold winds will relax, then the clouds will rain and provide relief from the heat. But with this pleasant weather, a new challenge also comes up, increasing moisture and damp in the kitchen. Read full news
